Welldana® solar panels are solid and stable for mounting on roof surfaces. They are dyed and if they are mounted with original black tubes and fittings, fortified with black straps, the result is a nice solid color. Are relatively easy m
Solar 11 is easy to use and install. It measures the panel temperature and the pool water. Is the pool water not the wanted temperature, tells the control the valve and the pool water is guided through the panels.
A set of sensor
3-way ball valve for regulation of water circuit in solar collector. The valve is regulated by a signal from the controller, of the solar collector, to gain the correct measurement of temperature at the sensor.
Volt 24 vac
Automatic 2-way vent valve made in brass for solar heater. Mounted on PVC angle with passage for 50 mm adapter.
Max pressure. 8 bar
50x50 mm manifold in strong rubber, for adapter on solar panels. Delivered without clamps.
50 mm plug in strong rubber, for 50 mm adapter on solar panels. Delivered without clamps.
50x50 mm angle tubes in strong rubber, for adapter on solar panels. Delivered without clamps.
Stainless clamp for tube and plug for solar panels.
Plastic coated 19x3 mm strap with 6 mm holes. Ideal for attachment of solar panels and tubes.
Delivered without screws - 10 m roll.
Black 5 mm nylon band. Ideal for horizontal protection of solar panels.
This tool kit is for reparation of small holes or cracks in solar panels. Contains:
100x100x5 mm PP panel
10 g LOCTITE 770 Primer
20 g LOCTITE 406 super glue
Complete solid colored solar heat pack from Milano, is connected to the pool water and can be circulated by the filter pump. The controller opens and closes automatically for the flow. Is mounted on suitable roof surfaces and optimally i
Complete solid colored solar heat pack from Toscana, is connected to the pool water and can be circulated by the filter pump. The controller opens and closes automatically for the flow. Is mounted on suitable roof surfaces and optimally